Laptop computers may be increasing in numbers, but upgrading or implementing notebook computer memory is still not so straight forward.
It's important to choose a memory that is compatible with your notebook computer. Since memory is a little delicate, you need to take extra care in handling it.
Tips to Remember when Adding Computer Memory First thing you need to do is make sure the Notebook is turned off and disconnected from any exterior power supply. There should be no lights visible, and if there is then you need to double check for any live power sources.
Unlike desktop PCs, Notebooks doesn't need to be taken apart in order to add memory. Usually located at the bottom of the laptop are the panels where you can access the memory slots. To view the existing memory, use a screwdriver to open the panel. When you open the memory panel, you should be able to see the front of the memory strips, making it easy for you to know the exact type of memory your Notebook uses.
The memory strips are locked in on the ends of the strips using small clips. If you want to remove the existing memory, flip the clips and gently pull the memory strips. If there is space available and you just want to add a new memory, then gently push it in to ensure it's fully seated in the slots then close the clips so the new memory will be held in place.
When you're done adding or replacing your new memory, replace the access panel and screw it back into place.
To ensure that the memory has been read by the Notebook, power it up and have a look. It should count the memory and inform you about its access once the PC starts up.
Should you encounter problems, just repeat the procedure and check that the memory is properly seated in the Notebook.
It's important to choose a memory that is compatible with your notebook computer. Since memory is a little delicate, you need to take extra care in handling it.
Tips to Remember when Adding Computer Memory First thing you need to do is make sure the Notebook is turned off and disconnected from any exterior power supply. There should be no lights visible, and if there is then you need to double check for any live power sources.
Unlike desktop PCs, Notebooks doesn't need to be taken apart in order to add memory. Usually located at the bottom of the laptop are the panels where you can access the memory slots. To view the existing memory, use a screwdriver to open the panel. When you open the memory panel, you should be able to see the front of the memory strips, making it easy for you to know the exact type of memory your Notebook uses.
The memory strips are locked in on the ends of the strips using small clips. If you want to remove the existing memory, flip the clips and gently pull the memory strips. If there is space available and you just want to add a new memory, then gently push it in to ensure it's fully seated in the slots then close the clips so the new memory will be held in place.
When you're done adding or replacing your new memory, replace the access panel and screw it back into place.
To ensure that the memory has been read by the Notebook, power it up and have a look. It should count the memory and inform you about its access once the PC starts up.
Should you encounter problems, just repeat the procedure and check that the memory is properly seated in the Notebook.
About the Author:
If you're considering a car tracking device purchase, we'll help you make the best buying decision.
0 comments
Post a Comment